BTA Riser and BTA Spacer Kit Installation Guide

Step 1 - Select desired location for BTA riser on your “between the arms” mounts in your aero bar

Step 2 - Using the 2 M5 button head screws mount the BTA riser to your “between the arms” mounts on your aero bar using Xnm of torque

Continue to Step 3 if using the BTA Spacers

Step 3 - Choose desired spacer angle

Step 4 - Mount the spacer directly to the BTA riser. Use 2 M5 button head screws thread the bolts in from the underside of the BTA Riser and into the Spacer

Step 5 - Mount any accessories with proper hole spacing directly to the BTA Spacer (ie, bottle cage, computer mount, etc.)